|
This equipment
is for the up-grade of ultrasonic instrumentation and software
of any of the systems listed below.
Al-Fin
insert bond inspection in diesel pistons
Gas cylinder
inspection
Tube and
Bar inspection
Any ultrasonic
application where our standard chart recorder software can be
used.
If
you have an ultrasonic system that is using old un-reliable or
obsolete ultrasonic instrumentation, it is now possible to up-grade
that system to use the latest ultrasonic instrumentation and software.
We
are able to offer ultrasonic systems with up to 32 channels, which
are supplied in a free standing cabinet,
with a simple Harting plug connection to your existing mechanics.
Ultrasonic
Instrumentation
Our
ultrasonic instrumentation is based on a single channel PCI card,
which can be coupled to an 8-Channel multiplexer if required.
The
features of our PCI ultrasonic instrumentation are:
-
0.5
to 20MHz bandwidth.
-
20KHz
pulse repetition rate.
-
10
Bit Analogue to digital conversion, 200MHz at the maximum pulse
repetition rate.
-
Excellent
near surface resolution.
-
Very
low noise in the PC environment at less that 20% full screen
height.
-
Designed
for high speed A-Scan, B-Scan and C-Scan bus master data transfer.
The
features of the 8-Channel multiplexer are:
-
8
remote pulsers, per-amplifiers and attenuators.
-
Maximum
pulse repetition rate per channel is the 20KHz pulse repetition
rate for the PCI card divided by the number of active channels.
-
All parameters are independently set per channel.
Industrial
Workstation Computer
The
Industrial Computer is based on a standard PC using a Pentium
III class processor. It is mounted into the cabinet at a height
convenient for most operators. The system features:
-
15 Inch LCD screen.
-
Passive
industrial backplane.
-
Plug
in processor card, for easy of maintenance.
-
Membrane
keypad, 59 keys, and a touchpad, pointing device.
Available
Software Packages
Supplied as
part of the upgrade is the software. We are able to offer the
following software packages:
Piston inspection
- checking the bonding of an Al-Fin insert in a diesel piston,
or crater cracking and oil cooling gallery position with up to
8 channels.
Gas cylinder
inspection using 4 shear wave channels and a single compression
wave channel.
Tube and
bar inspection and any other ultrasonic system where our standard
chart recorder software is suitable.
To obtain this
information as an Adobe Acrobat document Click
Here.
|
